Chemical protection suit mantenance – Fully Covered.
Our CPA 24 is the world’s first fully automated maintenance and testing system for chemical protective suits and firefighting protective gear that covers the entire process from the hot zone to the cold zone. It cleans, disinfects, and dries suits inside and out, automatically transporting them through the entire process—including an integrated leak test.
From the suits being moved from the hot zone into the booth, through the automatic closing of the doors, cleaning, disinfection, and drying, all the way to inspection, opening the doors, and moving them out to the cold zone, every step is fully automated . Additional lance racks are no longer necessary, as all media are supplied to and removed from the suits via the existing outlet openings.
The CPA 24 is modular in design and can be precisely adapted to the requirements of the respective fire department or plant fire department: with 1 to 4 loading stations, glass or opaque doors, automated or manually operated, loadable from one or both sides, in right- or left-hand versions. It can be supplied with a fully enclosed cabin for a fully automated end-to-end process or without a cabin for an automated internal process and manual external maintenance.
About 90 minutes after being hung up, the suits are available again in the cold zone – cleaned, disinfected, dried and inspected.
Chemical protection suit maintenance: Fully covered!
Our CPA 24 is the world’s first fully automated maintenance and testing system for chemical protective suits and firefighting protective gear that covers the entire process from the hot zone to the cold zone. It cleans, disinfects, and dries suits inside and out, automatically transporting them through the entire process—including an integrated leak test.
From the suits being moved from the hot zone into the booth, through the automatic closing of the doors, cleaning, disinfection, and drying, all the way to inspection, opening the doors, and moving them out to the cold zone, every step is fully automated . Additional lance racks are no longer necessary, as all media are supplied to and removed from the suits via the existing outlet openings.
The CPA 24 is modular in design and can be precisely adapted to the requirements of the respective fire department or plant fire department: with 1 to 4 loading stations, glass or opaque doors, automated or manually operated, loadable from one or both sides, in right- or left-hand versions. It can be supplied with a fully enclosed cabin for a fully automated end-to-end process or without a cabin for an automated internal process and manual external maintenance.
About 90 minutes after being hung up, the suits are available again in the cold zone – cleaned, disinfected, dried and inspected.
| Dimensions (WxLxH) | 2835 x 2125 x 2735 mm |
| Weight | 2,200 kg |
| Electrical Specifications | 400 V AC 50 Hz/25 kW/16 A |
| Mains water connection | 1 ¼” |
| Features | Washing Disinfecting Drying Checking |
| Operating Mode | One-person operation |
| Installation Type | fixed |
Fully automated maintenance and leak testing in a single process!
The CPA 24 is the first and, to date, only system that not only fully automates the care of chemical protective suits, but also checks their leak tightness within the same process. This is made possible by a specially developed, thermally controlled steam cleaning, disinfection, and drying process in which air, water, and steam are directed through the suit’s outlet openings — with or without cleaning and disinfection agents.
This media concept eliminates the need for cumbersome lance frames and, for the first time, allows the zipper to remain closed during the care process. As a result, the tightness test can be integrated directly into the fully automated cycle, and chemical protective suits with temperature resistance up to 60 °C can even be processed completely without chemical additives.
Manual work is limited to hanging up and connecting the suits via the outlet openings and selecting the program — a task that takes only a few minutes at the start of each cycle. Suit-specific process parameters for all common brands are stored in the system and are automatically selected via type input; the CSA suits are permanently identified by barcode, RFID, or similar methods.
Multi-station cabinets control each loading position individually, allowing different brands to be processed in the same cycle with different parameters. All steps, including the tightness test, are visualized in real time on the touch display, test reports are generated automatically, recipients are informed by SMS or e-mail, and the life record of the suits is updated accordingly.
Fully automated maintenance and leak testing in a single process!
The CPA 24 is the first and, to date, only system that not only fully automates the care of chemical protective suits, but also checks their leak tightness within the same process. This is made possible by a specially developed, thermally controlled steam cleaning, disinfection, and drying process in which air, water, and steam are directed through the suit’s outlet openings — with or without cleaning and disinfection agents.
This media concept eliminates the need for cumbersome lance frames and, for the first time, allows the zipper to remain closed during the care process. As a result, the tightness test can be integrated directly into the fully automated cycle, and chemical protective suits with temperature resistance up to 60 °C can even be processed completely without chemical additives.
Manual work is limited to hanging up and connecting the suits via the outlet openings and selecting the program — a task that takes only a few minutes at the start of each cycle. Suit-specific process parameters for all common brands are stored in the system and are automatically selected via type input; the CSA suits are permanently identified by barcode, RFID, or similar methods.
Multi-station cabinets control each loading position individually, allowing different brands to be processed in the same cycle with different parameters. All steps, including the tightness test, are visualized in real time on the touch display, test reports are generated automatically, recipients are informed by SMS or e-mail, and the life record of the suits is updated accordingly.
